Crosby®

Suitable for use with both Grade 80 and Grade 100 chain Individually proof tested at 2-1/2 times working load limit with certification Locking sys...

Forged alloy steel - quenched & tempered Innovative cradle design allows for 100% efficiency of Grade 100 chain Individually proof tested to 2...

Screw Pin Shackles can be used in most lifting and pulling applications. In addition, screw pin shackles can be used for applications involving sid...

Forged alloy steel, quenched & tempered, with alloy pins Meets performance requirements of Grade 8 shackles Working load limit permanently sho...

Forged, quenched & tempered, with alloy pins Working load limit and Grade 6 permanently shown on every shackle Hot-dip galvanized (G) or self ...

Forged, quenched, & tempered, with alloy pins Working load limit permanently shown on every shackle Hot-dip galvanized (G) or self colored (S)...

Bolt-Type Shackles can be used in any application where screw pin shackles are used. In addition, they are recommended for permanent or long-term i...

Quenched & tempered Alloy bows, alloy bolts Forged alloy steel 2 through 250 metric tons. Cast alloy steel 400 metric tons Meets performance r...

Quenched & tempered for maximum strength Forged alloy steel Available in galvanized (G) and self colored (S) finish Can be individually proof ...

Positioning devices, not intended to rotate under load Hot-dip galvanized Quenched & tempered Crosby products meet or exceed all requirements ...

Each base has a Product Identification Code (PIC) for material traceability, the name Crosby or "CG," and a size forged into it Based on the catal...

Made from Grade 100 alloy steel Heavy-duty Grip Latch will close automatically once load is applied to hook and will not open under load Grip Latc...

End fittings are quenched & tempered or normalized, bodies heat-treated by normalizing Hot-dip galvanized steel TURNBUCKLES RECOMMENDED FOR ST...

End fittings are quenched & tempered or normalized, bodies heat-treated by normalizing Hot-dip galvanized steel TURNBUCKLES RECOMMENDED FOR ST...

End fittings are quenched & tempered or normalized, bodies heat-treated by normalizing Hot-dip galvanized steel TURNBUCKLES RECOMMENDED FOR ST...

Forged bail provides the following: Easily readable "Raised Lettering" showing the name Crosby or "CG" and PIC Code for material traceability Gre...

Top washer has the following features: The WLL and recommended torque value are permanently stamped into each washer Washer is color coded for ea...

For horizontal lift Available in capacities of .5 thru 12 metric tons Jaw openings available: 0" to 4.75" Welded alloy steel body for strength and...

For transferring steel beams and attaching tackle eye Available in capacities of 2 through 25 metric tons (higher working load limits available up...

Universal - for lifting in any direction Available in capacities of . 5 thru 30 metric tons (higher working load limits are available upon request...

Forged alloy steel - quenched & tempered Individually proof tested to 2-1/2 times the WLL with certification Each hook has a PIC for material ...

The Crosby® line of 320 eye hooks are the most common and complete line up of eye hoist hooks made by Crosby®. The L-320AN series of hooks feature ...

Suitable for infrequent, non-continuous rotation under load. Use in corrosive environment requires shank and nut inspection in accordance with ASME...

Bearing design allows hook to rotate freely under load Capacities ranging from 2 through 15 metric tons Forged, quenched, & tempered Low profi...